The new VariSpring line of springs was designed to complement the VariShock
coil-over family. Once again, we used higher technology to resolve application
limitations. These springs are manufactured using a new chrome-silicon,
ultra-high-tensile wire. This allows the springs to set solid.
The springs can compress until the coils touch without damaging the spring
or causing it to take a set, which ultimately changes the ride height.
Since this wire can flex more than conventional wire, these springs have
greater travel than our competitors springs of the same rate. These
springs will allow your shocks to travel their full range of motion without
going solid. This gives you greater traction and control at full bump,
plus additional suspension travel for tuning. If you are ready to take
advantage of higher technology with greater travel and lighter, stronger
springs, step up to VariSprings.
VariSprings have a silver-powder-coat finish. They are individually labeled
with our part number and spring rate on the outside of the coils for easy
reference. VariSprings are available for front and rear applications in
four lengths and a broad range of rates. Refer to the technical
data sheet for specific lengths and rates available. Sold in pairs.
VAS 21-09XXX - 9" length 2-1/2" ID VariSprings for FRONT coil-over suspensions
VAS 21-11XXX - 12" length 2-1/2" ID VariSprings for REAR coil-over suspensions
|